Miller Electric 652 - Manual (Page 22)

OM-228 470 Page 18
4-7. 115 VAC Receptacle And Supplementary Protectors
! Turn Off power before
connecting to receptacle.
1 115 V 15 A AC Receptacle
RC9
Power is shared between RC9 and
Remote 14 receptacle RC8 (see
Section 4-13).
2
Supplementary Protector CB1
3 Supplementary Protector CB2
CB1 protects the 115 volts ac por-
tion of RC8 and RC9 from overload.
CB2 protects the 24 volts ac portion
of RC8 and Remote Power On/Off
from overload.
Press button to reset protector.
Ref. 800 166-C
3
1
2
4-8. Weld Output Terminals
! Turn Off power before
connecting to weld output ter-
minals.
1 (+) Positive High Inductance
(Submerged Arc) Weld Output
Terminal
Use this terminal for Submerged Arc
(SAW), TIG (GTAW)-scratch start
only, or Stick (SMAW) applications.
2
(+) Positive Low Inductance
Weld output terminal
Not recommended for Submerged
Arc applications.
3
(−) Negative Weld Output
Terminal
Connect work cable to this terminal
for Submerged Arc applications.
Ref. 800 166-C
3
1
2