Multi-information display – Mazda 2010 SPEED3 User Manual
Page 10
17
18
Multi-Information Display
Multi-Information Display
•
ENTER (UP/DOWN) switch:
Flip the switch up or down to select the
item, number, or letter (with highlight) and then push in to enter.
•
RIGHT/LEFT buttons:
Used to select digits when setting numbers for
the Maintenance Monitor.
•
BACK button:
Push to undo and/or return to the previous screen.
MID Setting
The MID can be used to change certain preferences to your liking.
They include:
To change a preference:
1
Push the INFO button several times until SETTINGS is displayed.
2
Select PREFERENCES from the menu.
3
Select the item you want to change from the menu.
MID CONTROLS (on steering wheel):
•
INFO button:
Push to switch to the MID.
Maintenance Monitor
The Maintenance Monitor will remind you of your next service and/or tire
rotation by simply entering a mileage and number of days interval. After
setting an interval for each, the system will display a message in the MID
for 5 seconds each time the vehicle is started when service due or tire
rotation is near (unless ENTER is pushed, which clears the message
completely). Once maintenance is done, the Maintenance Monitor needs
to be reset to notify you for the next service. To set, reset, or turn off the
Maintenance Monitor:
NOTE:
• For the service due notification, the number of days and distance can be
set. For tire rotation notification, only the distance can be set.
For service due, the message appears for whichever one occurs first,
•
mileage or number of days.
Push DOWN,
then ENTER
Push ENTER
Select OFF to turn
Maintenance
Monitor off.
Push ENTER
Push ENTER
Select a digit using the RIGHT or LEFT button (arrows above the digit
to be changed), and then flip the ENTER (UP/DOWN) switch up or
down to change the value of the digit. If there is no need to change the
digit, leave it as is. When finished, push in on the ENTER (UP/DOWN)
switch, then push the INFO button.
Push
INFO
Push
INFO
Push
INFO
Push
INFO
Distant Unit - km or miles
•
Temperature Unit - C
•
˚ or F˚
Alert Volume – high or low
•
Turn Signal Volume –
•
high or low
Time Zone (with
•
navigation) – to set your
time zone for the clock
Auto Adjust Clock
•
(with navigation) – to set
your clock using GPS
Screen Adjustment (with
•
navigation)/Screen Off
Language Selection
•
Restore Defaults
•
(with navigation)
230379_10c_Mazda3_SSG_050109.indd 18-19
5/1/09 3:53:47 PM