Instrument cluster – Mazda 2010 SPEED3 User Manual

Page 5

Advertising
background image

7

8

FUEL GAUGE

TACHOMETER

SPEEDOMETER

DASHBOARD

ILLUMINATION

1

ODOMETER/

TRIP METER/SELECTOR

2

GLOSSARY OF WARNING AND INDICATOR LIGHTS

NOTE:

See Owner’s Manual for more details and explanations.

A/T SHIFT

INDICATOR

Traction Control System

(TCS)/Dynamic Stability

Control (DSC)

On: TCS/DSC malfunction
Flashing: TCS/DSC operating

Seat Belt
Unbuckled/Malfunction
Cruise On (

Amber

)/

Cruise Set (

Green

)

Headlight High Beams On
Automatic Transmission

Malfunction

A/T Shift Position Indicator

Door/Liftgate Ajar
Air Bag/Front Seat Belt

Pretensioner System

Malfunction
Low Engine Oil Pressure

Charging System

Malfunction

Security Indicator Light

Key Warning

RED

Advanced key not detected
or advanced key battery is dead.

Key Detected (engine

ready to start)

GREEN

On: Advanced key detected; engine
is ready to start.
Flashing: Advanced key battery is low.

Brake Warning Light

Parking brake on/low brake
fluid/malfunction

Electronic Steering Lock
Dynamic Stability Control

(DSC)/Traction Control System

(TCS) Off Indicator Light

DSC OFF switched pushed and
TCS/DSC turned off.

DSC

OFF

Adaptive Front Lighting

System (AFS) OFF

Check Fuel Cap

Lights On (Exterior)

Anti-lock Brake System (ABS)

Malfunction

High Engine Coolant

Temperature

Flashes when engine starts to run hot
and on when engine is running hot.

Power Steering Malfunction

Check Engine Light
Tire Pressure Monitoring

System (TPMS

) Warning Light

On: Low Tire Pressure
Flashing: TPMS Malfunction

NOTE:

The tire pressure should be set

when tires are cold. Large changes in

ambient temperatures or altitude will

cause tire pressure change and may

cause TPMS warning light to turn on.

Low Fuel Level

Turn Signals/Hazard
Warning Indicator Lights

AFS

OFF

1

• Rotate the knob to adjust the brightness of the instrument cluster and other dashboard illuminations.

Vehicles with Multi-Information Display:

• To cancel the dimmer switch push the knob.

• With the headlights on, the illumination of the instrument cluster and information display dims.
NOTE: If the instrument cluster and other dashboard illuminations do not dim when turning on the

headlights, push the knob.

Instrument Cluster

2

• Push to toggle between odometer and trip odometer (A & B).

• When a trip meter is selected, push and hold to reset to zero.

DSC OFF

230379_10c_Mazda3_SSG_050109.indd 8-9

5/1/09 3:52:31 PM

Advertising