Macsense Connectivity Media Player none User Manual
Page 16
User Manual
14
out. Check if the Media Player is
defective by trying another card.
The Media Player starts playback but
stops immediately
z
The card may be dirty and may require
cleaning.
z
Ensure that the card is installed with proper
situation position.
No picture
z
Ensure that the equipment is connected
properly.
z
Check if outer equipment is on.
No sound
z
Ensure that the equipment is connected
properly.
z
If using a hi-fi amplifier, try another sound
source.
z
Check the volume adjustment.
z
Check the audio format, AAC and AC3
audio codec are not supported.
Distorted sound
z
Ensure that the input settings for stereo
system are proper.
z
No sound is heard during still picture
(pause).
No audio at digital output
z
Check the digital connections.
z
Check if the audio format of the selected
audio language matches your receiver
capabilities.
Picture is distorted during rapid advance
or rapid reverse
z
The picture will be somewhat distorted at
times: this is normal.
No rapid advance (or rapid reversed)
playback
z
Some video may have sections that
prohibit rapid advance (or rapid reverse).
No operations perform with the remote
control
z
Check the battery is installed with the
correct polarities (+and-).
z
The battery is depleted: replace them with
new ones.
z
Point the remote control unit at the remote
control signal sensor and operate.
Operate the remote control unit at a
distance but no more than 7 meters from
the remote control signal sensor.
z
Remove the obstacles between the remote