Macsense Connectivity Media Player none - Manual (Page 4)

User Manual
2
MPEG2 (*.vob, *.mpg)
Support Format
Video Data rate 1.0-10.0 Mbit/sec
VGA* 2 (MPC200 only) 640*480 60Hz
NTSC 720*480 or 704*480；29.97fps interlaced
PAL 720*576 or 704*576；25fps interlaced
Audio MPEG1-Audio-Layer1
MPEG1-Audio-Layer2
MPEG1-Audio-Layer3 (MP3)
Note : The AC3/AAC-audio support is optional. When it is not
enabled, this media player will only play video (no sounds) of the DVD
(*.vob) or MPEG2 file contains AC3/AAC-audio. Besides, We strongly
suggest you use CF card as media storage when playback MPEG2
video.
MPEG4
DivX3.11/4.x/5.x (*.avi) Xvid MPEG4 MS MPEG4 V2/V3(*.avi)
Note: We attached “How to get codec Information” in manual CD for your reference.
z Storage Capacity: Compact Flash card, IBM Micro Drive, SM/ MMC/ SD/ MS card
z Playback Functions: Play, Stop, Pause, Repeat, Previous/Next Track, Mute, Rotate,
Interval Time, Play List and Media Classification
z Audio: Stereo output 2W
z Environmental: Operating temperature: 0 C to 50 C; Relative humidity: 5%-95%,
non-condensing
1.3. Notice
z Do not use abrasive cleaners, waxes or solvents for cleaning, use only a dry or damp,
soft cloth.
z Use only with a high quality, safety-approved, AC/DC power adapter.
1.4. Check List
Before using this media player, please make sure that all the items listed below are present in
your package
Accessory Quantity
Media Player unit 1
DC Adapter 1
AV-RCA Cable 1
S-Video Cable 1
Audio Cable 1
Remote Control with 3V battery 1
2 You can switch between Video and VGA output by pressing the latch switch next to VGA connector.
Note that you must reboot the MPC device after output switch.