MGE UPS Systems ESV 11+Rack - Manual (Page 9)

MGE UPS SYSTEMS Pulsar ESV 8+Rack/11+Rack/14+Rack/22+Rack : 86-153523-00 9
7 output receptacles for connection of comput-
er equipments to Pulsar ESV+
Rack
(2 for ESV 8+) with output switchable recep-
tacles
7a and 7b by Solution-Pac,
8 power cords for connection of computer
equipment to Pulsar ESV+
Rack (not includ-
ed),
9 SUB-D 9 pins connectors communication
port,
10 identification plate,
11 warranty card,
12 network protection, RJ45 connector,
13 Solution-Pac CD-ROM,
14 serial cable for communication with a PC,
15 cover for optional communication cards,
key to diagrams page 6 to 8
2 "function" button: switches off audio warning
device or measures load charge percentage
(with utility power),
3 "ON/OFF" switch,
4 utility input receptacle,
5 utility power connection (use computer cord
only for ESV 8+
Rack),
6 15A, circuit protector for Pulsar ESV 11+ Rack
20A, circuit protector for Pulsar ESV 14+ Rack
30A, circuit protector for Pulsar ESV 22+ Rack
6a 10A, delayed fuse for Pulsar ESV 8+ Rack,
6b fuse holder,
16 Fan
17 Site wiring fault
NB:
Indicator lights
1c à 1f indicate the charge
level of the battery (if utility power present) or the
remaining battery backup time (without utility
power).
By pressing the button marked "function"
2
when utility power is present, they indicate the
level of load charge.