Maxtor DIAMONDMAX 100462887 User Manual
Maxtor Hardware
Advertising
Table of contents
Document Outline
- 1.0 Introduction 1
- 2.0 Drive specifications 3
- 2.1 Specification summary tables 3
- 2.2 Formatted capacity 8
- 2.3 Default logical geometry 8
- 2.4 Recording and interface technology 9
- 2.5 Physical characteristics 9
- 2.6 Seek time 10
- 2.7 Start/stop times 10
- 2.8 Power specifications 11
- 2.9 Environmental specifications 14
- 2.10 Acoustics 15
- 2.11 Electromagnetic immunity 16
- 2.12 Reliability 16
- 2.13 Agency certification 17
- 2.14 Environmental protection 18
- 2.15 Corrosive environment 19
- 3.0 Configuring and mounting the drive 21
- 4.0 Serial ATA (SATA) interface 25
- 5.0 Maxtor support services 35
- Figure 1. Typical 5V startup and operation current profile 12
- Figure 2. Typical 12V startup and operation current profile 12
- Figure 3. Serial ATA connectors and jumper options 22
- Figure 4. Attaching SATA cabling 22
- Figure 5. Mounting dimensions-top, side and end view 23
- 1.0 Introduction
- 2.0 Drive specifications
- 2.1 Specification summary tables
- 2.2 Formatted capacity
- 2.3 Default logical geometry
- 2.4 Recording and interface technology
- 2.5 Physical characteristics
- 2.6 Seek time
- 2.7 Start/stop times
- 2.8 Power specifications
- 2.9 Environmental specifications
- 2.10 Acoustics
- 2.11 Electromagnetic immunity
- 2.12 Reliability
- 2.13 Agency certification
- 2.14 Environmental protection
- 2.15 Corrosive environment
- 3.0 Configuring and mounting the drive
- 4.0 Serial ATA (SATA) interface
- 5.0 Maxtor support services