Matsui America MAT42LW507E - Manual (Page 10)

- 10 -
In equalizer menu the sound mode can be changed
to
User, Pop, Rock, Jazz, Flat and Classic by
pressing “  ” or “  ” button. Equalizer menu settings
can be changed only when Sound Mode is User.
Select the desired frequency by “  ” or “

” button
and increase or decrease the frequency gain by
pressing “

” or “

” button.
Press the “M” button to return to the previous menu.
Balance
By pressing “  ” or “

” button, select Balance.
Press “

” button to increase balance to the right.
Press “

” button to increase balance to the left .
Balance level can be adjusted between -31 and 31.
Headphone
By pressing “  ” or “

” button, select Headphone.
Press “

” or “

” or “ OK” button to enter hedphone menu.
Headphone
Sound Mode
Balance
10
0
Stereo
Volume
SOUND
volume
By pressing “  ” or “

” button, select Volume.
Press “  ” button to increase hp volume level.
Press “  ” button to decrease hp volume level.
Headphone volume level can be adjusted be-
tween 0 and 63.
sound mode
By pressing “  ” or “

” button, select Sound Mode.
Press “

” or “

” button to change sound mode.
Sound mode is used to identify sound mode of the
headphone and can be set to
mono, stereo,
dual A or dual B according to the transmission.
balance
By pressing “  ” or “

” button, select Balance.
Press “

” button to increase balance to the right.
Press “  ” button to decrease balance to the left.
Balance level can be adjusted between -31 and
31.
Press the “M” button to return to the previous
menu.
Sound Mode
By pressing “  ” or “

” button, select Sound
Mode. Press “  ” or “  ” button to change the mode.
You can select Mono, Stereo, Dual A or Dual B
mode, only if the selected channel supports that mode.
In case of bilingual broadcast (Dual Sound), you
can select original or dubbed language using mode
option.
AVL
Automatic Volume Limiting (AVL) function adjusts
the sound to obtain fixed output level between pro-
grams, having different sound levels.
Pressing “

” or “

” button will turn this feature on or off.
Effect
You can use this feature to switch the sound effect
on or off. If the current sound system is Mono and
the sound effect is switched on, then the sound will
be heard as if it is Stereo. If the current sound sys-
tem is Stereo, switching this effect on will give a
more spatial effect.
Pressing “

” or “

” button will turn this feature on or off.
Dynamic Bass
Dynamic Bass is used to increase bass effect of
the TV set.
By pressing “  ” or “

” button, select Dynamic Bass.
By pressing “  ” or “  ” button set Dynamic bass to
Low, High or Off. It is not recommended to select High
if listening at high volume levels. There is a subwoofer
output that can accept an active subwoofer if you
wish to create very high levels of Bass.
Subwoofer is active only if Dynamic Bass is set to
Off.
SubWoofer
It is possible to connect an external, active
subwoofer to the set to give a much deeper bass
effect.
By pressing “  ” or “

” button, select Subwoofer..
Subwoofer can be set to On or Off.
Dynamic Bass is not available if Subwoofer is set to
On.
Set Subwoofer to On when you connect an exter-
nal subwoofer to the set.
01-ENG-37737W-42737W-1072 UK-37-42 INCH 17MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)-50101853.p65 02.04.2007, 11:17 10