Matsui America MAT42LW507E - Manual (Page 12)

- 12 -
digit buttons on the remote control. There are
100 program storage between 0 and 99.
Band
Band can be selected either “C” or “S” by press-
ing “

” or “

” button.
Channel
Channel can be changed by “  ” or “  ” button
or Digit Buttons.
Colour System
By pressing “  ” or “

” button, select Colour
System. Press “ 
” or “

” button to change the
colour system to PAL, SECAM, PAL60 or AUTO.
If Sound System is set to I, SECAM is not avail-
able for the Colour System.
Note:In EXT mode, you can choose NTSC 3.58
and NTSC 4.43 as well.
Sound System
By pressing “  ” or “

” button, select Sound
System. Press “ 
” or “

” button to change the
sound system to BG, DK, I, L or LP.
Fine Tune
By pressing “  ” or “

” button, select Fine Tune.
Press “

” or “

” button to adjust the tuning.
Search
By pressing “  ” or “

” button, select Search.
Press “

” or “

” button to start program search-
ing. The searching will stop when a signal is
found. You can also enter a frequency value
directly by pressing the digit buttons.
VCR (Video Cassette Recorder)
• If you want to watch a VCR source then it will be
better to set VCR mode “on”. For this, while the
cursor is on this item press the “  ” or “  ” buttons
to set it “ On”.
• If you want to watch a DVD, then you must
set this item “ Off”.
Store Program
By pressing “  ” or “

” button, select Store
Program. Press “ 
” or “

” or “ OK” button to
store the adjustments. “Program Stored” will be
displayed on the screen.
Program menu
By pressing “

” or “

” button, select the fifth icon.
Program menu appears on the screen.
01 ITV
02 ZDF
03 CH5
04 C - 02
05 C - 05
06 C - 06
07 C - 08
08 C - 21
09 C - 23
10 C - 35
11 C - 43
12 C - 64
13 C - 68
14 S - 40
15 - - - - -
16 - - - - -
17 - - - - -
18 - - - - -
19 - - - - -
20 - - - - -
Name Insert
Delete APS
PROGRAM
By moving the cursor in four directions you can
reach 20 programmes in the same page. You can
scroll the pages up or down by pressing the navi-
gation buttons to see all the programmes in TV mode
(except the AV mode). By cursor action, programme
selection is done automatically.
Name:
To change the name of a decided programme, se-
lect the programme and press the RED button.
The first letter of the selected name starts to blink.
Press “
 ” or “

” button to change that letter and
“  ” or “  ” button to select the other letters. By press-
ing the RED button, you can store the name.
Insert:
Select the programme which you want to insert by
navigation buttons. Press the GREEN button. By navi-
gation buttons move the selected programme to the
decided programme space and press the GREEN but-
ton again.
Delete:
To delete a programme, press the YELLOW button.
Pressing the YELLOW button again erases the se-
lected programme from the programme list, and the
programmes below shift one up.
APS (Automatic Programming System)
When you press the BLUE button for APS, the follow-
ing warning screen will be displayed.
01-ENG-37737W-42737W-1072 UK-37-42 INCH 17MB15 OEM-(HD READY)(WO VGA-WO PIP)(S)-50101853.p65 02.04.2007, 11:17 12