Mdr-9dye — maintenance, Caution – Multiquip Mikasa Vibratory Walk-Behind Roller MDR-9DYE User Manual

Page 26

Advertising
background image

PAGE 26 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)

HYDRAULIC OIL FILTER CHECK

1. The hydraulic oil filter should be replaced after first 25 hours

of operation.

2. After first replacement, it should be replaced after 250 hours

operation (2 months), every 500 hours of operation (4
months), and every 1,000 hours of operation thereafter.

3. When the suction resistance exceeds 254 mmHg (oil

temperature in operation is 140 degrees F), replace filter.

4. To remove the oil filter, wind a cloth around the filter to prevent

slipping (Figure 31).

5. Tie a rope securely around the filter (Figure 31).

6. Forcibly pull the rope to remove the filter (Figure 32).

7. Immediately replace with new filter, screwing it on by hand

to avoid hydraulic oil leak.

Figure 31. Cloth and Rope Around Filter

Figure 32. Filter Removal

Use only genuine Mikasa
replacement oil filters (10
micron filter paper. Do not use
automobile-type oil filters.

NOTE

HYDRAULIC OIL CHECK

1. Check for any oil leakage from the hoses and joints daily.

2. Check hydraulic oil level every 4 to 5 hours after starting

operation.

3. After one week of operation, check hydraulic level twice a

day .

4. After two weeks of operation, check hydraulic level once a

day .

5. Replace hydraulic oil after first 200 hours and in every 1,000

hours of operation.

REPLACING HYDRAULIC OIL

1. Change the hydraulic oil every 1,000 to 1,500 hours of

operation. Change the hydraulic oil more often in high
ambient temperature operation.

2. Remove the drain plug and hose tank and drain the hydraulic

oil.

3.

Reinstall the drain plug to the oil tank.

4. Open the tank cap (Figure 30) and fill tank with hydraulic oil.

(Capacity: About 4.5 gallons). Use

Shell Tellus Oil #46

or

equivalent.

5. After filling tank, tighten the tank cap firmly with a wrench.

Figure 30. Hydraulic Oil Change

MDR-9DYE — MAINTENANCE

Make sure hydraulic oil is at a normal safe
operating level. DO NOT over fill.

CAUTION:

CAUTION:

Make sure that dust , water, and other foreign
objects do not enter tank. It is recommended to
filter the oil through a cloth.

Advertising
This manual is related to the following products: