Operatio – Magic Chef MCD775ST User Manual

Page 11

Advertising
background image

10

stand times by cycling on and off.

TIMER

You can use the TIMER function

independently, even while a cooking

program is going on in the oven.

NUMBER PADS(0-9)

Touch to set times or amounts.

CLOCK

Touch to set the clock.

RESET

Clears all previous settings if touched

before cooking starts.

START/STOP

Touch to start or stop cooking.

OPERATIO

OPERATIO

OPERATIO

OPERATION INSTRUCTIONS

N INSTRUCTIONS

N INSTRUCTIONS

N INSTRUCTIONS

BEEPS DURING OVEN SETTINGS

ONE BEEP: Oven accepts the entry.

TWO BEEPS: Oven does not accept the

entry, check and try again.

SETTING THE CLOCK

1. Touch CLOCK pad.

2. Use the number pads to enter the

correct time. You must touch at least

three numbers to set the clock(one for

hour and two for minutes).

3. Touch CLOCK pad again.

NOTE:

This is a 12 hour clock. When the oven

is first plugged in or when power

resumes after a power interruption, the

display will show ENTER CLOCK TIME,

if you prefer to not have the clock

displayed, touch RESET pad. You can

check the clock time while cooking is in

progress by touching the CLOCK pad.

SETTING THE OVEN TIMER

1. Touch TIMER pad.

2. Enter the amount of time you want to

count down by touching the

number pads. Digit time is in minutes

and seconds and set left to right. Set

one digit (a 5 for 5 seconds) or up to

four digits (2405 for 24 minutes, 5

seconds).

3. Touch START/STOP pad.

NOTE:

·Time countdown can be seen in

display for 3 seconds before clock or

cooking time is returned to display.

·Touch TIMER and then touch RESET

to cancel TIMER during timing

process.

SETTING COOKING TIMES AND

POWER LEVELS

A. One-stage Cooking

1. Use the number pads to set a cooking

time. You can set a cooking time from

one seconds to 99 minutes and 99

seconds. If you are setting a time greater

than one minute, you must enter

Advertising