Magic Chef MCD775ST - Manual (Page 12)

11
numbers for both minutes and seconds.
For example, to set 20 minutes, enter
2,0,0,0.
2. If you want to set a power level other
than 100% power, touch POWER, then
use the number pads to enter the power
level. You can set the power level
from 1 to 9.
3. Touch START/STOP to start cooking.
USE THESE SINGLE DIGIT TO
REPRESENT POWER LEVELS
Number pad % of Power
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
B. Two-stage Cooking
Some recipes require different stages of
cooking at different temperatures.
1. SET STAGE 1:
Follow steps 1 and 2 in “One-stage
Cooking”.
DO NOT TOUCH START/STOP PAD.
2. SET STAGE 2:
Touch COOK pad then enter proper
cooking time and (lower) power level.
(Most 2-stage recipes use lower power
for second stage.)
3. Touch START/STOP pad.
NOTE:
After total time has elapsed, 4
beeps sound and END appears in
display. Touch RESET pad or open oven
door to clear END before starting
another cooking function.
SETTING “ DEFROST BY TIME”
1. Touch DEFROST BY TIME pad.
2. Enter desired defrosting time by
touching correct number pads. Digital
timer sets minutes and seconds from
left to right so a single digit can be set
(5 for 5 seconds ) or up to 4 digits
(2405 for 24 minutes 5 seconds).
3. Touch START/STOP pad.
NOTE:
·After time has elapsed four beeps
sound and END appears in display.
Touch RESET pad or open door to
clear END before starting another
cooking function.
·After setting DEFROST BY TIME, oven
can be programmed to automatically
switch to one or two-Stage cooking.
A. For defrost by time and one stage
cooking, follow steps above. Before
touching START/STOP pad, touch
COOK pad, enter time and power
level. Then touch START/STOP pad.
B. For defrost by time and two stage
cooking, follow steps above. Before
touching START/STOP pad, enter
two-stage cooking programs.
SETTING “COOK BY WEIGHT”
1. Touch COOK BY WEIGHT pad.
2. Enter the one-digit code by touching
the correct number pad.
3. Enter weight.