Remote start operation – Magnadyne EXTREME X7 User Manual

Page 9

Advertising
background image

LED

Function

Off

Disarmed

Slow Flash

Armed

Fast Flash

Passive Arming

On (Solid)

Valet Mode

LED

Function

2 Flashes... pause

Zone 2: Trigger on Trunk/Hood

3 Flashes... pause

Zone 3: Trigger on Door Switch

4 Flashes... pause

Zone 4: Trigger on Optional Sensor

5 Flashes... pause

Zone 5: Trigger on Ignition Switch

Chirp

Function

1 Chirp

Arm

2 Chirps

Disarmed

3 Chirps

Defective Reminder

4 Chirps

Disarm / Triggered

6 Chirps

Car Locator

Parking Lights

Function

1 Flash

Arm

2 Flashes

Disarmed

3 Flashes

Disarm / Triggered

12 Flashes

Car Locator

Constant On

Under Remote Control

Siren, Horn

Parking Light

LED

Doors

Starter

Dome Light

1. Arming

1 or 3 Chirps

1 Flash

Slow Flash

Locking

Disable

2. Disarming

2 or 4 Chirps

2 or 3 Flashes

Fast Flash

Unlocking

Turns on for 30 Seconds

3. Trigger

Alarming

Flashes

Slow Flash

Disable

Flashes

4. Panic

Alarming

Flashes

Flashes

5. Car Locator 6 Chirps

12 Flashes

Turbo Timer mode keeps the engine running after arriving at you destination for a programmable
time period of 1, 3 or 5 minutes. This allows the system’s time to conveniently cool down the
turbo after you have left the vehicle.

To Activate:

1. While the engine is running, set the emergency brake and place the transmission to "Park".
2. Before turning off the engine, press and release and buttons at the same time. The light

will flash to indicate the remote start has entered “Turbo Timer” mode.

3. Remove the “Ignition Key” from the key cylinder. The engine will keep running.
4. Exit and secure the vehicle. The engine continues running until the pre-programmed time

elapsed.

9

Remote Start Operation

(continued)

Turbo Timer Mode (Also See Installation Manual)

Chirp Status Indications

Parking Light Flash Indications

Alarm Operating Conditions

LED Status Indications

Advertising