Turn and lane-change signals, Fog lights, Turn and lane-change signals -56 fog lights – Mazda 2008 CX-7 User Manual

Page 210: Switches and controls

Advertising
background image

Black plate (210,1)

Turn and Lane-Change
Signals

qTurn Signal

Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.

If the indicator light continues to flash
after a turn, manually return the lever to
its original position.

Right turn

Left turn

OFF

Right lane
change

Left lane
change

Green indicators on the dashboard show
which signal is working.

Lane-change signals

Move the lever slightly toward the
direction of the change

―until the

indicator flashes

― and hold it there. It

will return to the off position when
released.

NOTE

If an indicator light stays on without flashing
or if it flashes abnormally, one of the turn
signal bulbs may be burned out.

Fog Lights

í

Use this switch to turn on the fog lights.
They help you to see as well as to be seen.

To turn the front fog lights on, rotate the
fog light switch to the

position.

The headlight switch must be in the
position to turn on the front fog lights.

Fog light switch

To turn them off, rotate the fog light
switch to the OFF position or turn the
headlight switch to the

or OFF

position.

NOTE

l

The fog lights will turn off when the
headlights are set at high beam.

l

(With auto-light control)
If the fog light switch is in the ON position
and the headlight switch is in the AUTO
position, the front fog lights will be turned
on when the headlights, the exterior lights
and dashboard illumination are
automatically turned on.

5-56

Driving Your Mazda

í

Some models.

Switches and Controls

CX-7_8X59-EA-07E_Edition3 Page210
Wednesday, July 25 2007 3:18 PM

Form No.8X59-EA-07E

Advertising