Mazda 2008 CX-7 - Manual (Page 221)

Black plate (221,1)
Mode selector dial
Turn the mode selector dial to select
airflow mode (page 6-4).
NOTE
l If you want to slightly adjust the airflow
amount, set the mode selector dial at
.
l For example, when the mode selector dial is
at the
position between the and
positions, airflow from the floor vent is less
than that of the
position.
A/C switch
í
Push the A/C switch to turn the air
conditioner on. The indicator light on the
switch will illuminate when the fan
control dial is set at position 1, 2, 3, or 4.
Push the switch once again to turn the air
conditioner off.
NOTE
l The air conditioner may not function when
the outside temperature approaches 0 °C
(32 °F).
l (U.S.A., Canada)
When the mode is set to
or with the
fan control dial in a position other than 0
and the temperature control dial in the
maximum cold position, the air intake
selector switches to the recirculated air
mode and the A/C turns on.
If A/C is not desired, press the A/C switch
to turn it off.
Air intake selector
This switch controls the source of air
entering the vehicle.
Press the switch to alternate
between the outside air and recirculated
air modes.
It is recommended that under normal
conditions the switch be kept in the
outside air mode.
Outside air mode (indicator light
turned off)
Outside air is taken into the vehicle. Use
this mode for normal ventilation and
heating.
Recirculated air mode (indicator light
illuminated)
Outside air is shut off. Air within the
vehicle is recirculated.
Interior Comfort
Climate Control System
6-7 í
Some models.
CX-7_8X59-EA-07E_Edition3 Page221
Wednesday, July 25 2007 3:18 PM
Form No.8X59-EA-07E