Maxtor FireWire 800 - Manual (Page 28)

2
26
Installing Drivers Only
This section describes how to install your new drive without
installing Retrospect software.
The Maxtor OneTouch button feature will not function if you
choose to install under this option.
Locate your operating system and the interface you plan to use in
the following section and follow the corresponding installation
procedure detailed.
Macintosh
No drivers are necessary. If you’re using OS 9, connect your
Maxtor OneTouch II drive as described in “Step 2. Connect the
Drive” on page 14. If you’re using OS X, connect your drive as
described in “Step 2. Connect the Drive” on page 8.
Windows
Use the Custom Install feature on the Maxtor Install CD.
1. Insert the Install CD in your CD-ROM drive.
Wait for the Maxtor screen to appear.
2. Select Install Drivers and follow the steps to on-screen steps
to complete the installation.
Your drive is now ready to use.
To Install Retrospect at a Later Time
If you wish to install a complete copy of Retrospect software
and the Maxtor OneTouch feature at a later time, you can do
so by following the original installation instructions provided in
“Installing Your Drive” on page 6 of this chapter.