Memorex MPH6928 User Manual
Page 13
2) Flip the handset retainer over so
the tab is facing up.
3) Slide the handset retainer back
onto the base.
▼
Standard Wall Plate Mounting
This phone can be mounted on any standard AT&T or GTE wall plate.
1) Plug the AC adapter into the DC
input jack on the back of the
base, then place the AC adapter
cord inside the left molded
channel cord holder.
2) Plug a short telephone cord into the
TEL LINE
jack on the base, then place
the telephone cord inside the right
molded channel cord holder.
12
!
DO NOT use an outlet
controlled by a wall switch.
!
Before you plug the other end
of the telephone cord into the
modular jack on the wall,
charge the battery (refer to
“Charging the Battery Pack,”
page 18).
C:...MPH6928 VA OM.vp
Mon Feb 14 15:27:28 2000
Color profile: Disabled
Composite Default screen