Memorex MPH6928 - Manual (Page 25)

7) Press
SELECT
. The following screen
appears, and a cursor flashes indicating
that the display is ready for the number
to be edited.
8) Enter the phone number with the number keypad.
9) Press
SELECT
. The handset beeps and
displays a confirmation screen. For
example, if you store a name and number
into memory location number one, then
the handset shows
Memory 1 Stored
.
10)The display then returns to the Memory Store screen. You may select
another number to edit (return to step 3) or you may press
MEM
to
return to standby.
ERASING A NUMBER FROM MEMORY
Use these steps to erase a programmed number from memory. Once a
number is erased, that memory location may be programmed with a
new number.
1) Remove the handset from the base.
2) Press and hold
MEM
for two seconds.
The handset shows the Memory Store
screen with any saved numbers displayed.
3) Use the : and ; keys or number keypad to select the memory
location you would like to delete. The < and > keys toggle between the
names display and the numbers display.
4) Press
SELECT
. The following screen
appears with the memory location
number that you have selected in
the display.
5) Use the ; key to move the > cursor
down to the
Delete Memory
command.
24
NOTE
If you select Go Back
at any time, no changes are
made and the handset shows
the Memory Store screen.
HINT
Use the < and > keys to
toggle between the names
and the numbers displayed
in memory.
Store Number
3055551212
Memory 1 Stored
Memory Store
1> KAYSIE SCHLITZ
2 MEMOREX
> Edit Memory 1
Delete Memory 1
Go Back
Edit Memory 1
> Delete Memory 1
Go Back
C:...MPH6928 VA OM.vp
Mon Feb 14 15:27:41 2000
Color profile: Disabled
Composite Default screen