Macrom M-DVD902RV - Manual (Page 17)

Replacing the battery
If the remote control does not function, or if the operating range becomes
reduced, replace the old battery with new one.
terminal or put into fire which may cause the battery to explode.
remote control away from young children.
Basic operation
Turning on the player
Press the [
] button on the remote control or on the front panel to turn on the
player, and the input source and format are displayed on the screen:
Notes: 1.The default is DVD-IN.
2. If the message “NO DISC” is displayed on the screen, insert Disc Media
or press SRC button to change input source.
Selecting the input source
1. During Power ON, press SRC button to switch from one mode to another.
2. The operating modes changes in the following order.
DVD-IN > AV 1> AV2> DVD-IN
Note: DVD Disc cannot be inserted if product switched to AV mode.
DVD-IN
NTSC
Input source name
The system of the input source
detected automatically
16
Note