Macrom M-DVD902RV - Manual (Page 20)

To repeat a custom segment:
1. During playback, press A-B to set the starting point “A”.
2. Press A-B again to set the ending point “B”. The player plays the
segment between point A and point B repeatedly.
3. To cancel the repeat playback and resume normal playback, press A-B
again.
Changing Viewing Angle during Playback (Multi-Angle)
To change viewing angle:
1. Press ANGLE button to cycle through available viewing Angles during DVD
playback. The current angle number and the total number of angles available
appear on the screen.
2. Press ANGLE button again to select a different angle, then press it again to
exit and return to the normal viewing angle. The Angle display disappears
automatically if ANGLE button is not pressed again within 3 seconds.
Note: Viewing angles are available for a DVD if the back of the DVD jacket
contains a multiple angles icon.
Using zoom
During disc playback, press ZOOM to switch through the available zoom
settings. (2x,3x,4x,1/2x,1/3x,1/4x and normal)
While viewing JPG/JPEG images on a disc, press ZOOM, then press FF or
FR to switch the zoom settings.
Playing audio CDs
To display playing time and the current track:
During CD playback, press DISPLAY button to display, the disc type, current
time, current track number and total number of the tracks are displayed on the
screen.
To repeat a track or the entire CD:
During playback, press REPEAT repeatedly to cycle through the available
settings:
To repeat a custom segment:
1. During playback, press A-B to set the starting point “A”.
2. Press A-B again to set the ending point “B”. The player plays the
segment between point A and point B repeatedly.
2. To cancel the repeat playback and resume normal playback, press A-B
again.
19