Mamiya 7 II - Manual (Page 14)

Removing lens
Mounting/Removing Lenses
1. Cock the shutter and close the light shield
curtain.
After cocking the shutter, close the light shield curtain
just as same as mounting the lens.
2. Remove the lens.
While pressing the lens releasing button “A”, turn the
lens in the arrow direction until the lens alignment dot
“B” lined up with the alignment dot “C” on the camera
body, and pull out the lens.
•
Never touch the light shield curtain. If
touched, light leakage or a malfunction
may result.
•
When removing a lens from the camera in
which the film is loaded, do not move the
light shield releasing lever. If this lever is
moved, the film will be exposed to the light.
•
When the light shield curtain is open the
lens cannot be removed. Close the curtain
to remove the lens.
•
When the lens has been removed and film
remains in the camera body avoid exposure
to direct sunlight as film fogging may
result.
• Put the front and rear lens cap on the lens
12
when the lens is removed.