Inserting an ipod – Memorex Mi1006 User Manual

Page 8

Advertising
background image

7

INSERTING AN IPOD

®

Locate the correct iPod

®

holder to

use as shown on pages 12-13. Insert

the holder into the cavity (as shown),

making sure the tabs are facing front,

and slip the tabs into place.

1

Press the rear side of the holder until

it is positioned inside the cavity.

NOTE: To remove the holder, insert

your finger (or other object) into the

gap in the holder, then gently pull the

holder out to remove it.

2

If using the dock: Insert the iPod

®

onto

the holder. Gently push down so the

connector on the iPod

®

slides onto the

connector on the Mi1006. If the Mi1006 is

turned off, once you connect the iPod

®

, it

will start charging the battery until it is full. If

the Mi1006 is turned on and in

AM/FM/LINE IN mode, once the iPod

®

is

connected, the Mi1006 will change to

iPod

®

mode automatically. Then, if you

disconnect the iPod

®

, the Mi1006 will

revert back to the AM/FM/LINE IN mode.

When the iPod

®

is connected to the

Mi1006, it will be in the Pause mode.

3

If using the LINE IN jack: Insert an audio cable

(not included) into the LINE OUT jack on your

player and the other end into the LINE IN jack

on the side of the Mi1006. Press the Power

button to turn this unit on, then repeatedly press

the MODE button to select the LINE IN mode.

The external player’s output sound will be heard

through the Mi1006's speakers. If the Mi1006 is

already on, when you connect the external unit

to it, the Mi1006 will change to LINE IN mode

automatically. If you disconnect the external unit

from the LINE IN jack, the Mi1006 will revert

back to the AM/FM mode.

4

NOTES:

CHARGING: When the iPod

®

is inserted into the dock, the iPod’s

®

battery will charge until it is

full.

If the unit is already turned on and in AM/FM mode, if you insert the iPod

®

into the dock or

connect an external unit to the LINE IN jack, the unit will automatically switch to iPod or LINE IN

mode. If you disconnect the external unit or iPod

®

, this unit will revert back to the AM/FM mode.

CHANGING THE MODE: If units are connected to the dock AND the LINE IN jack, you can

press the MODE button repeatedly to select between iPod (dock)/LINE IN/AM/FM mode as

desired. (You will not be able to select between iPod/LINE IN mode, if there is no device or

iPod

®

connected to the LINE IN jack or the iPod

®

dock.) To turn off the unit, press the Power

button.

BACKLIGHT: When the unit is on, the LCD backlight will always be on.

Advertising