Memorex Mi1006 - Manual (Page 9)

8
OPERATION
With an iPod ® connected (see
previous page), turn the Mi1006
on by pressing the Power button
(if it is not on already).
1 1
1
Operate the iPod ® as per its
owner’s manual and the sound
will be heard through the
Mi1006’s speakers.
Adjust the volume as desired by
pressing the Volume Up/Down
buttons.
1 1
2
For private listening, plug in
headphones into the
Headphones jack on the side of
the Mi1006. The speakers will be
disconnected when headphones
are plugged in.
When done, press the Power
button and also turn off the
iPod ® .
1 1
3
USING AN IPOD ® WITH THIS UNIT
NOTES:
• When the iPod ® is inserted
into the dock, you can press
the TUNE Up/Down/Skip n / o
buttons to skip to the
beginning of the current
track/previous or next track.
• The default volume setting
level is 6. After your have
adjusted the volume setting, if
you turn the unit off and then
on again, the volume level will
be set back to the default level
of 6.