Motion Computing F5 - Manual (Page 23)

Chapter 2 Features 17
RFID reader (optional)
Your system may include an integrated 13.56 MHz RFID (Radio Frequency Identification)
reader that you can use to retrieve information from RFID tags.
RFID tags use radio frequency (RF) transmissions to identify a product, animal, or person.
RFID does not require direct contact or line-of-sight scanning, and can be scanned through
many materials, including clothing. An RFID tag can store much more data than a typical
bar code, and some RFID tags can both transmit and record data. RFID can be used for asset
tracking, identification, process control, health care, and pharmaceutical applications.
The RFID reader supports the following formats:
• ISO/IEC 14443A/B
• ISO/IEC 15693
• ISO/IEC 18000-3
For information about using the RFID reader, see “Using the RFID reader (optional)” on
page 29.
Smart card reader (optional)
Your tablet may include the optional smart card reader located on the back of the tablet,
next to the battery. Using smart card software, this device can read information from and
write information to the smart card when the card is inserted into the reader. The smart card
is an ISO 7816 PC/SC compliant, contact type smart card reader/writer.
For information about using the smart card reader, see “Using the smart card reader
(optional)” on page 31.
Microphones
The system is equipped with two liquid-resistant, array microphones that you can use to
record audio, dictate notes, and use voice commands without the need for an external
microphone.
For information about using the microphones, see “Using the built-in microphones” on
page 32.