Configuring tcp/ip in windows vista – Motorola DIGITAL VOICE MODEM SBV5122 User Manual

Page 17

Advertising
background image

B

SBV5122U Cabling Instructions • Connecting to the Internet

9
SBV5122 Digital Voice Modem • Installation Manual
568756-001-b

Configuring TCP/IP in Windows Vista

1. Click Start.

2. Right click on Network.

3. Scroll down to Properties.

4. Click Manage network connections.

5. Right-click on the appropriate (if more than one listing) Local Area Connection.

6. Click Properties. Vista may prompt you for permission to continue – Click Continue.

7. Select Internet Protocol Version4 (TCP/IPv4) and click Properties.

8. Verify that the Obtain an IP address automatically and Obtain DNS server address

automatically options are selected.

9. Click Advanced. Use the table below to verify the Advanced TCP/IP Settings:

IP Settings Tab

DNS Tab

WINS Tab

DHCP Enabled listed
IP address box

Default gateways box
is empty

Automatic metric is
selected

DNS server addresses box is empty

Append primary and connection specific DNS suffixes
is selected

Append parent suffixes of the primary DNS suffix is
checked

Register this connection’s addresses in DNS is checked

Append these DNS suffixes (in order) is not selected

WINS addresses box
is empty

Enable LMHOSTS
lookup is checked

Default: Use
NetBIOS setting
from the DHCP
server is selected

10. Click OK.

11. Click Alternate Configuration and verify that Automatic private IP address is selected.

12. Click OK. Vista prompts you to restart your computer.

Verifying the IP Address for Windows XP or Windows Vista

Windows XP

1. Click Start.

2. Select Run.

3. Type cmd and click OK.

4. Type ipconfig and press ENTER to display your IP configuration.

Advertising