MITSUBISHI ELECTRIC EN-1 - Manual (Page 10)

EN-10
1 Enter “3” and press the Enter key.
2 To enable the e-mail notifi cation function of Projector-
View, enter 1 and press the Enter key. (Default is OFF (0).)
(See pages 12 - 15 for ProjectorView function.)
Setting the LAN control (LAN-Controlled Mode)
1 Enter “5” and press the Enter key.
• When you don’t use PJLink™ protocol
communication, skip this item. (See page 16 for
PJLink™.)
2 To enable the PJLink™ certifi cation:
Enter “1” and press the Enter key. (Default is ON (1).)
Setting the PJLink™ certifi cation (PJLink certifi cation Mode)
Preparation/SetUp (continued)