Mvh-702drsc — loading and unloading guidelines – Multiquip Mikasa Reversible Plate Compactor MVH-702DRSC User Manual
Page 24
PAGE 24 — MQ-MIKASA MVH-702DRSC COMPACTOR — PARTS & OPERATION MANUAL — REV. #1 (12/17/03)
MVH-702DRSC — LOADING AND UNLOADING GUIDELINES
LIFTING
1.
Use a crane or lift to load and unload the machine. A
skilled crane operator is required to perform the job.
2.
When lifting the machine, check for any damaged or loose
bolts, lifting hooks, and shock mounts.
3.
Check any damaged or loose bolts in the guard frame to
avoid machine sliding off.
4.
Make sure that the machine is shut off before machine is
lifted.
5.
Use reliable cable for lifting.
6.
Always lift the machine vertically and keep the machine
away from workers and animals.
7.
Do not lift the machine higher than the required height.
TRANSPORTING
1.
Always make sure that the machine is shut off while being
transported.
2.
Check that the fuel cap is properly closed and tightened.
3.
When traveling long distances or on rugged terrain, drain
the fuel of the machine before transporting.
4.
Tie down the machine securely on the transportation so
that it will not move or topple over.