Matsui America DVDR100 - Manual (Page 23)

18
Initial OSD Settings
19
Initial OSD Settings
Video Output Setting
Please choose the preferred video output according to the output
format.
1
Press Setup in the stop mode to display the menus.
2
Press to select “VIDEO” and press .
3
Press to select “Video Output”, and then press .
4
Press / to select the preferred video output setting and
press .
a a SCART RGB
Select “SCART RGB” when your TV supports Scart feature
and you’ve connected the unit’s SCART Out jacks to your TV’s
SCART In jacks.
b b Component
Select “Component” when your TV provides Component feature
and you’ve connected the unit’s P-Scan Pr Y Pb Out jacks to
your TV’s Component In jacks.
c c
S-Video
Select S-Video when your TV provides S-Video feature and
you’ve connected the unit’s S-Video Out jacks to your TV’s S-
Video In jacks.
•
Select S-Video Only if your TV does not provide SCART or component
jacks.
•
For connection details, please refer to the Quick Start Guide.
What if the screen turns black while setting the Video Output OSD ...
-- Press TV Sys. a number of times until the screen is back to normal.
-To return to the Setup MENU screen
Press .
-To complete the setup operation
Press
Setup to exit from Setup MENU screen.
TUNING
RECORD/DISC
SYSTEM
TIMER
VIDEO
<SETUP> Exit
Progressive
Component
S-Video
1-3
VIDEO Setup
-continued
a a
b b
c c
2 2
3 3
4 4