Wiring diagrams, Warranty, Replacement parts – MicroNet Technology ELITE E36ODGPE User Manual

Page 9: Product reference information, Th tp th tp

Advertising
background image

9

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

WARRANTY

Your gas appliance is covered by a limited
twenty year warranty. You will find a copy of
the warranty accompanying this manual.
Please read the warranty to be familiar with its
coverage.

Retain this manual. File it with your other
documents for future reference.

REPLACEMENT PARTS

A complete parts list is found at the end of this
manual. Use only parts supplied from the
manufacturer.

Normally, all parts should be ordered through
your Lennox distributor or dealer. Parts will be
shipped at prevailing prices at time of order.

If you encounter any problems or have any
questions concerning the installation or appli-
cation of this system, please contact your dis-
tributor, or Lennox directly:

LENNOX HEARTH PRODUCTS
1110 West Taft Avenue
Orange, CA 92865

PRODUCT REFERENCE INFORMATION

We recommend that you record the following important information about your fireplace. Please
contact your Lennox dealer for any questions or concerns. For the number of your nearest Lennox
dealer, please call 800-731-8101

Your Fireplace's Model Number _______________________________________

Your Fireplace's Serial Number ________________________________________

The Date On Which Your Fireplace Was Installed __________________________

The Type of Gas Your Fireplace Uses ___________________________________

Your Dealer's Name _________________________________________________

When ordering repair parts, always give the
following information:

1. The model number of the appliance.
2. The serial number of the appliance.
3. The part number.
4. The description of the part.
5. The quantity required.
6. The installation date of the appliance.

WIRING DIAGRAMS

Wiring diagrams are provided here for reference purposes only. This information is also provided on schematics attached directly to the appliance
on a pullout panel located within the control compartment.

CAUTION: LABEL ALL WIRES PRIOR TO DISCONNECTION WHEN SERVICING CONTROLS. WIRING ERRORS CAN CAUSE IMPROPER AND
DANGEROUS APPLIANCE OPERATION.

INTERMITTENT ELECTRONIC WIRING DIAGRAM

BROWN

BROWN

BLACK

BATTERY

WALL SWITCH BOX

BLACK (SENSOR)

BLACK (IGNITOR)

SPARK TO PILOT IGNITOR

IGNITOR MODULE

3V

RED

PILOT

IN

OUT

VENT

LO

HI

TH

TP

TH

TP

IN

ORANGE (THTP)

BLACK (TP)

GREEN (TH)

LIMIT

SWITCH

UMBILICAL CORD (9 Feet)

Advertising