Millennium Enterprises Integrated Modeling Amplifier - Manual (Page 69)

1. From Preset mode, you must get to the configuration screen by either pressing the <Edit> button and turning the <Preset/Effect>
wheel, or simply press the <Config> button until the display appears something like this:
2. Now turn the <Page> knob to page 2 and the display will appear like this:
3. Now turn the <1> knob, making the Volume Pedal parameter active for assignment to an expression pedal. Now press the <Assign>
button and the display will appear like this:
4. Now all you have to do is select the expression pedal that you want to assign the volume pedal parameter control to and move the pedal
and the display will appear something like this:
5. Now that the assignment has been made, make sure that you store your changes and press the <Preset> button to return to Preset
mode.
Vol Pd Exp 1 Min[100]Max
2
FACTORY USER
%kHz
msdB On 1
CHANGED LINK
Pdl 2
CHANGED LINK
Off 3
CHANGED LINK
100 4
PAGE
1
OF
19
WAH TUBE EQ L/R OUTS
L/R OUTS
# b
GATE
BANK
EQ DIST
Select a Contrl F.Switch
2
FACTORY USER
CHANGED LINK CHANGED LINK CHANGED LINK
WAH TUBE EQ L/R OUTS
L/R OUTS
# b
GATE
EQ DIST
Vol Pdl Morph Pdl
2
FACTORY USER
% 100 1
CHANGED LINK CHANGED LINK
% 0 3
CHANGED LINK
PAGE
2
OF
2
WAH TUBE EQ L/R OUTS
L/R OUTS
# b
GATE
BANK
EQ DIST
Config: Series 2,2
2
FACTORY USER
%kHz
msdB 1 1
CHANGED LINK CHANGED LINK CHANGED LINK
PAGE
1
OF
2
WAH TUBE EQ L/R OUTS
L/R OUTS
# b
GATE
BANK
EQ DIST
Johnson Millennium
User Guide
Section - 5 Advanced Topics
61