Millennium Enterprises Integrated Modeling Amplifier - Manual (Page 81)

3. Turn either function keys <2 or 3> to assign a CC number to the selected expression pedal . The display will appear like this on page 11 if,
for example Exp 1 is selected. (Exp1=Internal Expression pedal 1 insert on Millennium w/o the J-12. Or, expression pedals 1 or 2 on the J-
12 when connected. The display now reads:
Page 12 will appear like this:
4. Press the <Utility> button to exit.
For a complete explanation of expression pedal names, please refer to page 68.
CC Transmit Channel - This option allows you to set the MIDI channel on which CCs will be sent out the Millennium MIDI Out port to
other MIDI devices. If you are using the J-12 for the Millennium only, you don't need to worry about setting up this option.
However, if you plan to use the J-12 for continuous control over other MIDI devices (either in conjunction with the Millennium or by
themselves), you need to assign a MIDI transmit channel for each of the CC numbers you'll be using for continuous control of the other
devices.
To change the MIDI channels on which the selected CCs will transmit to other MIDI devices, do the following:
1. Press the <Utility> button once. The and the display should appear something like this:
Stereo Cab:4x12 Tuner
2
FACTORY USER
2 1
CHANGED LINK
2
CHANGED LINK
2 3
CHANGED LINK
Off 4
CHANGED LINK
PAGE
1
OF
16
WAH TUBE EQ L/R OUTS
L/R OUTS
DIGITAL
CLIP
# b
GATE
CCsnd: Exp3 Exp4
2
FACTORY USER
1
CHANGED LINK
OFF 2
CHANGED LINK
OFF 3
CHANGED LINK CHANGED LINK
PAGE
12
OF
16
WAH TUBE EQ L/R OUTS
L/R OUTS
DIGITAL
CLIP
# b
GATE
CCsnd:Exp1 Exp2
2
FACTORY USER
1
CHANGED LINK
30 2
CHANGED LINK
OFF 3
CHANGED LINK
4
CHANGED LINK
PAGE
11
OF
16
WAH TUBE EQ L/R OUTS
L/R OUTS
DIGITAL
CLIP
# b
GATE
Johnson Millennium
User Guide
Section - 6 The J-12 Foot Controller
73