Magnadyne M12A - Manual (Page 9)

Trigger the System (Continued)
Ignition Trigger (Clear the Flash Icon and Melody Sound):
When the Security System is triggered, the LCD screen will alert the user through melody sound
and flashing icons. By pressing the “SET” button 3 times within 3 seconds it will clear the flashing
icons and stop the melody sound.
Stop the Melody Sound:
When the Security System is triggered, it will alert the user with flashing icons on the LCD Display
and audible melody sound. To stop the melody sound, press any button on the LCD transmitter.
Noise Abatement:
This security system has a Noise Abatement Circuit. This circuit prevents annoying, repetitive
false alarms by filtering out environmental conditions.
If the security system is triggered five times or more, the circuit will interpret this as a false alarm.
After the fifth trigger, the noise abatement circuit ignores, or bypasses that switch or sensor until
the next switch or sensor is activated.
Noise Abatement Circuit covers doors, hood and trunk switches differently. If the security system
is triggered by one of these switches for three cycles, the switch will be bypassed until the trigger
ceases.
Anti-Car Jacking
Warning: This security system’s car jacking feature default setting is “OFF”. So be sure to enable
this feature if you feel it is needed.
Active Anti-Car Jacking
1. Press and hold the transmitter and buttons at the same time for 2 seconds while the
vehicle’s ignition is “ON” and all doors are closed. The parking lights will turn on for 1.5
seconds to indicate this feature.
2. Once the system is armed, and you are forced from your vehicle, the system will trigger when
the door is opened and closed while the ignition is “ON”.
Passive Anti-Car Jacking
1. Turn the ignition switch to the “ON” position, the system will arm.
2. Once the system is armed, if you are forced from your vehicle, the system will trigger when the
door is opened and closed while the ignition is “ON”.
9
Doors Triggered Trunk/Hood
Triggered
Warn Away
Trigger
Shock Sensor
Trigger
Ignition
Trigger
M12A-UM 5/23/06 12:43 PM Page 9