Medion MD 80137 - Manual (Page 41)

41 MD 80137 Digital DVD Recorder
and Player User’s Manual
Manual Disc Recording
1. Place an initialized DVD+R or DVD+RW disc in the DVD recorder (see p. 38).
2. Select the channel you want to record.
3. Press MONITOR on the remote to switch to external input mode.
4. Press SOURCE to select the input source that you want to record. Press SOURCE
multiple times to cycle through the options: CVBS1 > CVBS2 > S-VIDEO01 >
S-Video02 > CHANNEL
5. Press RECORD on the remote control or the front panel of the DVD recorder to start
recording.
6. Press STOP to stop recording. Please wait 15-17 seconds while your recording
completes.
7. Press MONITOR to switch to DVD mode. The recorded title will appear on the screen.
Press ENTER to view your recorded video.
After recording, the following messages will also be stored:
•
Record date and channel source.
• Record time.
• Recording length and recording mode.
• Recording index screen.
DVD+RW: These discs can be erased and recorded over.
DVD+R: These discs can be recorded and finalized only once. They cannot be
erased and recorded over.
Pause recording
1. Press PAUSE while recording to temporarily stop the DVD recorder from recording
information. This may be useful for excluding sections that you do not want to
record, such as TV commercials.
2. Press PAUSE again to resume normal recording.
Chapters
Chapters can only be added after your recording has completed, not during the
recording itself. Please see page 45 for more information about adding chapters.
manual disc recording