Medion MD 80137 - Manual (Page 47)

47 MD 80137 Digital DVD Recorder
and Player User’s Manual
troubleshooting
Unwanted mosaic-
like display during
playback. Poor disc.
Video CD (MPEG1).
Replace disc.
Playback with DVD format.
No sound. DVD player is set to
slow or fast
playback.
Audio terminals are
not connected.
TV volume is too low.
Wrong AUDIO OUTPUT
setting.
Press PLAY to resume normal playback.
Check audio connections (see pages
11-17).
Adjust TV volume.
Check AUDIO OUTPUT settings (see page
34).
Problem Possible Cause Solution
No video/picture. TV is not connected
properly.
Wrong setting for
VIDEO OUTPUT.
Check video connections (see pages
11-17).
Press SETUP and check the Video Output
settings (see page 34).
Remote control does
not work. No batteries in
remote control.
Dead batteries.
Remote control not
being pointed at the
remote sensor.
Put in new batteries (see page 20).
Replace batteries (see page 20).
Point the remote control at the remote
sensor (see page 20).
Can not play a disc
recorded on this DVD
recorder on another
DVD player. Disc is not finalized.
Disc is one-time
only.
Other DVD player can
not play DVD+R or
DVD+RW discs.
Other DVD player can
not calibrate because
disc has too little
data.
Finalize the disc (see pages 45).
If a disc is recorded with content which
is available to be copied one time
only, it can’t be played on another DVD
player.
Check the manual of the other DVD
player.
Try a disc with a larger amount of video
data recorded to it.
Does not play, even
when a title is
selected. Prohibited by the
parental controls. Confirm the parental controls setting
(see page 35).