Output terminal panel familiarization – Multiquip 60HZ GENERATOR DCA25SSIU3 User Manual

Page 20

Advertising
background image

PAGE 20 — DCA25SSIU3 60 HZ GENERATOR • OPERATION AND PARTS MANUAL — REV. #0 (12/20/10)

OUTPUT TERMINAL PANEL FAMILIARIZATION

OUTPUT TERMINAL PANEL

The Output Terminal Panel (Figure 6) shown below is
located on the right-hand side (left from control panel) of
the generator. Lift up on the cover to gain access to
receptacles and terminal lugs.

NOTICE

Terminal legs “O” and “Ground” are considered bonded
grounds.

OUTPUT TERMINAL FAMILIARIZATION

The “Output Terminal Panel ” (Figure 6) is provided with
the following:

 Two 120/240V output receptacles @ 50 amp

 Two Circuit Breakers @ 50 amps

 Two 120V GFCI receptacles @ 20 amp

 Two GFCI Circuit Breakers @ 20 amps

 Five Output Terminal Lugs ( U, V, W, O, Ground)

Figure 6. Output Terminal Panel

Advertising
This manual is related to the following products: