MITSUBISHI ELECTRIC HS-S8300E(BRS) - Manual (Page 8)

8
11 – 11 – 99 09 : 21 : 01
<RECORDING SET UP>
3H
1M
OFF
1
SHOT
<MAIN MENU>
DISPLAY
TIME DATE SEARCH
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
FIRST TIME SET UP
Use JOG to select,
and ENTER.
Press DISPLAY to exit.
ALARM REC MODE
ALARM REC DURATION
EMERGENCY REC
ONESHOT•FIELD
ONESHOT•INTERVAL
<REAR TERMINAL>
WRNG•TAPE END
REC- 1
REC
SERIES
CALL OUT
CLOCK OUT
MODE OUT
REC IN
0
0H
<MAINTENANCE>
POWER LOSS LIST
ALARM LIST
ALL MENU INITIALIZE
POWER LOSS LIST CLEAR
ALARM LIST CLEAR
< REPEAT REC TIMES>
< ELAPSED TIME>
< FIRST TIME SET UP>
TAPE END
QUASI V-SYNC
TAPE LENGTH
VIDEO MODE
PB HEAD SELECT
BUZZER
TIME DATE ADJUST
RS-232C STOP
ON
E-180
COLOUR
NORMAL
WRNG
OFF
11
11
99
09 :21 : 01
<TIME DATE SEARCH>
15:00
23
FORWARD
TIME
DATE
DIRECTION
Use JOG to adjust,
and ENTER.
<DISPLAY>
1
SMALL
ON
11 - 11 - 99 09 : 21 : 01
DISPLAY MODE
TIME DATE SIZE
BLUE BACK
Ex.<MODE 1>
<TIMER PROGRAM>
DW START END HR
SPL 08 : 40 17 : 10 L12SP
2 SAT 08 : 40 12 : 20 L12SP
3 WED 22 : 00 22 : 54 3SP
4 - - -
- - : - - - - : - - - - -
5 - - - - - : - - - - : - - - - -
6 - - - - - : - - - - : - - - - -
7 - - - - - : - - - - : - - - - -
8 - - - - - : - - - - : - - - - -
SPECIAL DW MON–FRI
< ALARM LIST>
ALL MENU INITIALIZE
Turn the SHUTTLE RING <<
then all MENU will be
initialized.
POWER LOSS LIST CLEAR
Turn the SHUTTLE RING <<
then POWER LOSS LIST
will be cleared.
ALARM LIST CLEAR
Turn the SHUTTLE RING <<
then ALARM LIST will be
cleared.
0001 01 - 05 - 99 01 : 00
0002 01 - 07 - 99 21 : 10
0003 01 - 10 - 99 09 : 15
< POWER LOSS LIST>
01 01 - 03 - 99 01 : 00
02
03
DAYLIGHT SAVINGS
DATE
MONTH
YEAR
TIME
< TIME DATE ADJUST>
<RS-232C>
TRANSMISSION RATE
DATA BIT LENGTH
STOP BIT LENGTH
PARITY BIT
DELIMITTER<SEND>
DELIMITTER<RECEIVE>
VCR ADDRESS 1200
8BIT
1BIT
NONE
CR
CR
NONE
SETTING THE MENUS
1
Press the DISPLAY button.
• The “MAIN MENU” is displayed.
2
Turn the JOG dial to select the desired item.
• When the JOG dial is turned to the right, the cursor moves downward.
• When the JOG dial is turned to the left, the cursor moves upward.
3
Turn the SHUTTLE ring to the right.
• The desired item is selected and the menu will appear.
4 Turn the JOG dial to select item.
5 Turn the SHUTTLE ring to the right and the setting item will flash.
6
Turn the JOG dial to change the setting.
7
Turn the SHUTTLE ring to the right to set.
8
Press the DISPLAY button.
• The present time display will appear.
The operating parameters of this VCR are set through various on-screen menus.
Set the menus as follows:
OPERATION
Present Time Display