Miller Camera Support 1014 - Manual (Page 12)

SERVICE, SALES AND SUPPORT
WEB SITE www.millertripods.com
STORAGE
SPARE PARTS AND ACCESSORIES
WARRANTY
When storing your Arrow for extended periods: remove
BATTERY, clean fluid head, and place in a safe, dry place, away
from direct sunlight. Arrow heads can be stored horizontally or
upright. However, it is not advisable to store the head for
extended periods with the tilt locked in an extreme position,
either forward or backward.
ITEM ITEM NO.
Battery P3798
Euro camera plate 79 x 64.5mm (3/8” + 1/4” screws) #860
Camera screw 3/8”W P0037
Camera screw 1/4”W P0036
1/4” + pin camera carriage #493
Telescopic Pan Handle with clamp #694
Telescopic Pan Handle #692
Pan handle - Telescopic with handle clamp #684
Clamp nut P3836
Flat Base adaptor #360
Miller Authorised Service Agents must carry out all service and
repair work. Failure to observe this requirement may void
warranty. It is advisable to notify Miller or a Miller Authorised
Service Agent if a change of performance is observed as a
result of dropping or rough usage. For information regarding
sales and service of Miller products, or for your nearest Miller
representative please contact us via our website or at the
following:
MILLER CAMERA SUPPORT EQUIPMENT
30 Hotham Parade, Artarmon, Sydney,
NSW 2064 Australia
Tel: +61 2 9439 6377
Fax: +61 2 9438 2819
Email: [email protected]
MILLER FLUID HEADS (EUROPE) LTD.
Unit A2, Ford Lane Industrial Estate
Ford Lane, Ford
West Sussex BN18 0DF, United Kingdom
Tel: +44 (0)1243 555255 Fax: +44 (0)1243 555 001
Email: [email protected]
MILLER Camera Support (LLC) USA
216 Little Falls Road, Cedar Grove,
New Jersey 07009-1231 USA
Tel: (973) 857 8300
Fax: (973) 857 8188
Email: [email protected]
MILLER TRIPODS Canada
1055 Granville Street
Vancouver BC V6Z1L4, Canada
Tel: (604) 685 4654
Fax: (604) 685 5648
Email: [email protected]
Please refer to warranty card for complete details.
3994-5 05/06