To remove the rear cushion, Seating and safety restraints – Mazda 2008 Tribute User Manual

Page 80

Advertising
background image

WARNING: Make sure seat belt buckle heads are through
elastic holders on seat backs. Seat belt buckle heads may break
if they are trapped underneath the seatback as the seatback is
rotated down.

WARNING: Before returning the seatback to its original
position, make sure that cargo or any objects are not trapped
underneath the seatback. After returning the seatback to its
original position, pull on the seatback to ensure that it has fully
latched. An unlatched seat may become dangerous in the event
of a sudden stop or collision.

3. Remove the head restraints

stored under the front
passenger seat and return them
to the original position on the
seat backs.

To remove the rear cushion

1. Lift the yellow tab to release the

hinges.

2. Pull the cushion to the outboard

side of the vehicle.

2008 Tribute (j14)
Owners Guide (post-2002-fmt)
USA
(fus)

Seating and Safety Restraints

80

Advertising