Miele W 1612 - Manual (Page 25)

The washer is equipped with fully
electronic controls and load
recognition. It automatically determines
how much water is needed, based on
the size and absorbency of the load.
This means that program sequences
and times can vary.
The program sequences listed here are
based on the basic program, with a
maximum load. Extra options have not
been taken into account.
At any time during a program, you can
check the display to see which step
has been reached.
Special features in the program
sequences:
Anti-crease:
To help prevent wrinkles, the washer
drum will continue to turn at intervals for
up to 30 minutes after program
completion. Exceptions: In the Woolens
program, there is no anti-crease
feature.
The washer can be opened at any time.
1)
For temperature selections from
60°C to 95°C a second rinse will take
place. For temperature selections
below 60°C there are 3 rinse cycles.
A third or fourth rinse cycle will occur
if:
– there is heavy sudsing in the drum
– the final spin speed is less than
700 RPM
– No
u has been selected.
2) A third rinse cycle will occur if:
No
u has been selected.
Program sequence
25