Siemens Xelibri 5 - Manual (Page 5)

Getting Started
4
left page (4) of PACO e2, A31008-H9250-A45-2-7619 (25.09.2003, 19:47)
© Siemens AG 2003, P:\PN\ISDN\XELIBRI Vers. 2\UGS\PACO\e2\paco_getting_started.fm
VAR Language: ENG; VAR issue date: 18-September-2003
Switching on
To switch on your Xelibri
Hold  . Enter your PIN if asked.
To enter a PIN
A PIN number protects your Xelibri against unauthorised
use. Service providers often supply a SIM with the PIN
switched on; see your documentation for the number.
Type the PIN on the keypad. Click  to correct, if neces-
sary.
Click
 to confirm.
You have three tries at entering the right PIN. If there’s
a problem, see What if...? on p 21. Your provider may
let you switch off the PIN (p 20).
Setting the time and date
When you first use your Xelibri, it will ask you to set the
time and date.
Type the time using 24 hour clock and date, preceding a
number with a zero if it’s less than 10.
Click
 when done.
Standby
When a network has been found and its name displayed,
your Xelibri is in standby. If you can’t see a network
name, please see What if...? on p 21.
Switching off
From standby, hold  .
Precautions
All mobile phones are radio transmitters; switch off
where prohibited (e.g. aircraft).
To be certain you use your Xelibri safely and correctly,
see Precautions/Maintenance on p 23.
Please
enter PIN
****
<C OK
paco.book Seite 4 Donnerstag, 25. September 2003 7:48 19