A1 pro cd, Cd basic operation – Musical Fidelity A1 User Manual

Page 10

Advertising
background image

A1 PRO CD

CD BASIC OPERATION

Issue 4: 6

th

May 2008

Page 10 of

16

NO DISC

CLOSE

LOADING AND PLAYING COMPACT DISCS

To load a disc, manually lift the lid up from the front lip,
to allow access to the mechanism.

A1 with lid fully open to load/unload disk

Displays will show “OPEN”
When the lid is fully extended, gently place the disc,
with the label facing upwards, onto the spindle. Place
magnetic puck onto spindle so it sits flat on the CD
surface. Lower the lid again so the displays show
“CLOSE”.


PLAY 1

PLAY 17

PLAY 17 0:01

PLAY 1 0:01

STOP 7 41:56

A1 with lid closed ready for playing


The unit will scan the contents of the disc. After a short
delay, the display windows then show the total number
of tracks available on the CD, and total playing time. In
the following example there are 7 tracks, lasting a total
of 41 minutes 56 seconds


If mains power to the unit is switched on with a disc

already loaded, it will automatically search for the disc.

TRACK SELECTION (Remote control)
Simply press the PLAY button to start a CD playing
from the first track.
Alternatively, a specific track can be selected directly by
pressing one of the ten track number buttons grouped in
the centre-section of the remote control. The chosen
track then plays after a short delay of about 5 seconds.
To play a track number with two digits, press the second
digit button on the remote control within this delay
period, example for track 17:
Press 1:

Press 7 within about 5 seconds:

After a small pause, machine plays selected track:

If a track number is chosen which is not available on the
disc, for example pressing button number 9 if the CD
has only 7 tracks, an INVALID TRACK message is
briefly displayed (along with elapsed time of last track
played).The display then indicates STOP, and shows the
number of tracks available on the CD and total playing
time, as in the above example.

DISC PLAY
If PLAY/PAUSE is pressed, the unit will begin playing
from track 1, confirmed by the word PLAY appearing
on the left of the display, with 1 in the centre and
elapsed time on the right.

When all tracks on the CD have been played, the display
shows STOP and total number of tracks on the disc.

OPEN

Advertising