Motorola HDT101 - Manual (Page 40)

34
Adding a Channel
If you wish to add a specific channel to your program list, follow these
steps for adding a single channel:
1
Log on to the following website:
http://www.antennaweb.org/
2
Select Choose An Antenna.
3
Enter your address and find the DTV stations airing the
HDTV/EDTV/SDTV signals you can receive.
For more information on the types of DTV signals, see “Digital TV
Options” on page 4.
4
Write down the channel number(s) you wish to add.
When adding a channel, you must add both the channel number and
its sub-channel number (when applicable). In the AntennaWeb site,
the sub-channel number is shown after a period. For example, if
channel 6 has several sub-channels, they would be listed as 6.1, 6.2,
etc. On the HDT101, sub-channel numbers are shown after a -; for
example, 6-1, 6-2, 6-3, etc.
5
Press
MENU
on the remote control. The main menu is displayed.
6
Highlight Installation and press
SELECT
. The Password window is
displayed.
7
Enter your four-digit password. If you have not yet created your own
password, enter the default password: 0000. The Installation menu is
displayed.
If you wish to change your password, see “Changing Your
Password” on page 32.