Motorola HDT101 - Manual (Page 47)

41
Connecting your A/V Receiver, VCR, and High-definition TV
1
Connect the HDT101 ports to the Y, Pb, and Pr ports on your TV
using the supplied component video cables.
2
Connect a coaxial audio cable to the
S
/
PDIF OUT
connector on the
HDT101 and the
SPDIF
input connector on the A/V receiver.
3
Connect a video cable to the
VIDEO
connector on the HDT101 and
the
CABLE
/
TV VIDEO
connector on the A/V receiver.
If your equipment supports it, S-Video connections may be used in
place of the standard composite video connections. In most cases,
S-Video offers a higher level of standard-definition video quality than
composite video.
4
Connect a stereo audio cable to the
VCR AUDIO OUT R
and
L
connectors on the A/V receiver and the
INPUT AUDIO R
and
L
connectors on the stereo VCR.
When using the digital audio output (
S
/
PDIF OUT
), the left/right
baseband audio connections from the HDT101 to the A/V receiver
are not needed.
5
Connect a stereo audio cable to the
OUTPUT AUDIO OUT R
and
L
connectors on the stereo VCR and the
VCR AUDIO IN R
and
L
connectors on the A/V receiver.
6
Connect a video cable to the
INPUT VIDEO
connector on the stereo
VCR and the
VIDEO VCR OUT
connector on the A/V receiver.
7
Connect a video cable to the
OUTPUT VIDEO
connector on the stereo
VCR and the
VIDEO VCR IN
connector on the A/V receiver.
8
Connect a video cable to the
INPUT VIDEO
connector on the TV and
the
TV
/
MONITOR OUTPUT VIDEO
connector on the A/V receiver.
To switch between viewing input from your VCR and input from your
HDT101, change your TV’s video inputs from the Component input to the
Video input. You may also need to change your A/V receiver’s video
input selection as well.