Motorola 6881012B23-D - Manual (Page 4)

4
SETTING THE TIME
• To set the time, press F until seTr Trime is displayed,
then press R .
• The hours digits (represented by the grey characters in
the sample shown below) begin to blink.
Set the hours digits by pressing R until the correct hour
is displayed along with the appropriate a (for A.M.) or p
(for P.M.) symbol. Keep pressing R to cycle through the
hours from A.M. to P.M. When the correct hour (A.M. or
P.M) is displayed, press
F to adv ance to the minutes
digits.
• The first digit of the minutes (represented by the grey
character) begins to blink. Press R to change the first
digit of the minutes. Press F to advance to the second
digit of the minutes. Press R to change the second digit
of the minutes. Press F one more time to leave the time
setting function.
• All portions of the time of day screen, except the colon
( : ), stop blinking. The time of day is now set and the
pager is in the standby mode.
12 :00a
8: 0 0a
81012B23.FR4 Page 4 Tuesday, September 26, 1995 19:40