Motorola 6881012B23-D - Manual (Page 7)

7
SELECTING AN ALTERNATE FREQUENCY
Synthesized and Auto-Synthesized Models:
• Press F until your choice of scan mode or frequency
designator is displayed (for example: scan1 , f1 , f2 ,
etc.).
• To view alternate frequencies, press R . When scan or
the frequency designator you wish to select is displayed,
press
F to “lock in” the new frequency or mode.
• When confirm is displayed, press R to activate your
selection.
STANDARD FEATURES
Time of Day/Standby Screen: The time of day is dis-
played while the pager is on and in the standby mode.
Time Stamp: The time of day that each message was re-
ceived is displayed on a separate screen following the
message.
Memory Retention: When the pager is turned off, all mes-
sages and the time of day remain in memory.
Memory Capacity: The pager can store up to 16 messag-
es or a total of 160 characters. Individual messages can be
up to 20 characters in length.
Message Protect/Lock: Up to five individual messages can
be locked in memory so they will not be overwritten by new
messages or discarded during the “Erase All” function.
Hold Full Indicator: You can selectively protect up to 5
messages by locking them in memory. When an attempt to
lock more than 5 messages is made
hold full is dis-
played for 2 seconds indicating that this message cannot
be protected.
Automatic Reset: If you do not reset your pager during an
alert, it will automatically reset after 8 seconds.
Chirp in Silent (Non-Vibrate Models Only): When the pag-
er is in the SILENT mode, a short chirp (beep) will alert you
to incoming messages.
81012B23.FR4 Page 7 Tuesday, September 26, 1995 19:40