Minolta Dimage F100 - Manual (Page 103)

103
Setting the date and time
It is important to accurately set the clock. When a still image or a movie clip is recorded, the date and
time of the recording are saved with the image and are displayed during playback or can be read with
the DiMAGE Viewer software included on the CD-ROM. The camera’s clock is also used with date
imprinting (p. 70).
When the Date/Time-set option is selected and entered, the
date/time screen will be displayed. The left/right keys of the con-
troller are used to select the item to be changed and the
up/down keys are used to change the value. From left to right,
the screen shows the year, month, day, hour, and minute. When
the date and time have been adjusted, set the clock by pressing
the central button of the controller.
Setting the date format
The date format that is displayed or imprinted can be changed: YYYY/MM/DD (year, month, day),
MM/DD/YYYY (month, day, year), DD/MM/YYYY (day, month, year). Simply select the format and
enter it by pressing the central button of the controller; the new format will be displayed on the menu.
Video output
Camera images can be displayed on a television (p. 94). The video output can be changed between
NTSC and PAL. North America uses the NTSC standard and Europe uses the PAL standard. Check
which standard is used in your region to play back images on your television set.
Enter
Setup Date/Time set
2002 7 20 16 33 : . .