Mitsumi electronic XD3500U - Manual (Page 49)

EN-49
Troubleshooting (continued)
If the following problem occurs after the lamp is replaced, check the following fi rst.
Problem Solution
The projector does not
turn on. • Fit the lamp cover securely. (See pages 43 and 44.)
• Reset the lamp operating time. (See page 44.)
The STATUS indicator
blinks. • Reset the lamp operating time. (See page 44.)
Kensington Lock
This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security System.
Refer to the information that came with the Kensington System for instructions on how to use it to secure the
projector. Please contact Kensington Technology Group below.
Kensington Technology Group
2855 Campus Drive
San Mateo, CA 94403, U.S.A.
Phone: +1- (650)572-2700 Fax: +1- (650)572-9675