Mitel 5212 - Manual (Page 66)

Paging Other System Users
You can place page announcements through endpoint speakers or external speakers (if
applicable). Your system may use page zones to prevent announcements from transmitting
through every endpoint in the system. Each page zone contains a different combination of
extensions and external paging equipment.
Contact your system administrator for page zone information. You can use the following
table to save the page zone information for future reference.
Placing a Page Announcement
To place a page announcement:
1. Press 7.
2. Enter the page-zone number (0 to 9).
3. Wait for the tone, make your announcement, and then hang up.
Enabling or Disabling the Paging Feature
You can enable or disable the Page feature for your extension. If your extension is
assigned to more than one page zone, the Page on/off feature code enables or disables
your extension for all pages zone (you cannot select individual zones).
To enable or disable paging for your endpoint:
Dial 325 (on/off). PAGE RECEIVE ON (or OFF) appears.
Page Zone Name Number Description