Mitel 5212 - Manual (Page 42)

24 Mitel ® Model 5212/5224 IP Endpoint User Guide for Inter-Tel ® 5000 Systems
A
n
sw
er
in
g an
d
P
laci
n
g
Calls
Using Speed Dial
You can use speed dial to quickly dial stored phone numbers. Speed-dial numbers are
either stored in the system (System Speed Dial), or in your endpoint (Station Speed Dial).
Using System Speed Dial
Your system administrator assigns Speed-Dial location numbers, which are available to
anyone in the system. Contact your system administrator for more information.
To view or dial System Speed-Dial numbers:
1. Dial 381. REVIEW SYS SPEED # <code range> appears.
2. Do one of the following:
• Press (Up) or (Down) to scroll through the speed-dial locations.
• Enter the speed-dial location (000 to 999 or 0000 to 4999).
3. Press # to dial the number.
Using Station Speed Dial
You can use Station Speed Dial to store phone numbers for your personal use. Other
system users do not have access to your Station Speed-Dial numbers.
Storing Station Speed-Dial Numbers
You can store up to 10 Station Speed-Dial numbers.
To store a Station Speed-Dial number:
1. With the handset on-hook, dial 383. PROGRAM STN SPD (0-9) OR SCROLL
appears.
2. Do one of the following:
• Press (Up) or (Down) to scroll through the speed-dial locations.
• Enter the speed-dial location (0 to 9).
Press # to select the location.
3. Enter the name of the speed-dial contact (up to 10 characters). For dialpad
character descriptions, see “Using the Dialpad Buttons to Enter Characters” on
page 25 .
4. Press # to save the name.
5. Enter the extension number or external number. If you are storing an external
number, enter the Outgoing Call access code (default code is 8) before you enter
the number. Do not use hyphens or colons in stored speed-dial numbers.
6. Press # to save the location. STN SPD BIN # <number> UPDATED appears.