Intel IXM5414E - Manual (Page 215)

Intel® Blade Server Ethernet Switch Module IXM5414E 205
In order to change a VLAN from dynamic to static, use the config vlan makestatic
command.
BcastStorm This displays the administrative mode of broadcast storm control for this VLAN. If
storm control is enabled, storms are controlled by counting the number of broadcast
packets within a certain time period. If a count limit is exceeded, the packets are
discarded.
McastStorm This displays the administrative mode of multicast storm control for this VLAN. If
storm control is enabled, storms are controlled by counting the number of multicast
packets within a certain time period. If a count limit is exceeded, the packets are
discarded.
Class of Service commands
config classofservice 802.1pmapping
Use this command to map an User priority to a Traffic Class priority queue.
Default = see table below
Format config classofservice 802.1pmapping <0-7> <0-7>
show classofservice 802.1pmapping
Use this command to show the current mapping of IEEE 802.1p priority values to traffic class
priority queues.
Format show classofservice 802.1pmapping
User Priority
The IEEE 802.1p priority number. The range is 0 to 7.
Traffic Class Priority Queue
The priority queue number. The range is 0 to 7.
Table 6. Classofservice 802.1p Mapping
IEEE 802.1p priority IXE5416 priority queue
0 2
1 1
2 0
3 3
4 4
5 5
6 6
7 7